Product Picture
Relying on the difference of vapor and liquid density.
the main valve is guided to open through the pilot valve.
and the displacement is large.
The valve body and valve cover are made of cast steel.The internal parts are all made of stainless steel, and the wearallowance has been fully considered in the design of the movable parts.which improves the service life of the trap.
U-shaped runner design achieves water sealing effect without leakageof steam.
Flexible closing system with patented technology, no steam leakage.Install anti-water shock device, so that the fluid entering the valve bodydoes not produce water hammer phenomenon. Built-in check valve, suitable for superheated steam environmentBuilt-in filter allows the trap to work in a clean environment.Select different displacement curves according to the pressure.The back pressure rate is as high as 90%b or more.After stopping, the screw plug can be opened to drain the condensedwater to prevent damage to the trap due to low temperature freezing
GB/T12250-2005 Steam Trap Terminology Marking Structure Length
GB/T22654-2008 Technical Conditions for Steam Traps
GB/T12251-2005 Test Method for Steam Traps
ISO 6948 Automatic steam traps
Production and performance characteristic tests
